Availability: | |
---|---|
Quantity: | |
Product Category:General model spray gun
Model:ECO-RC-21
Application
Automotive interior parts/exterior parts sprayino
Notebook parts /chassis spraying,water-based paint spraying
Plastic metalsurface spravingvarnish colorpaint3C
3C product line spraying, robot reciprocating machine installation.
Product parameter
1, intake adjustment and spray amplitude adjustment are set in the machine ed quipment, It can remote control operation,and independent control, reduce the troubled of operation,designed to return material hole is easy to clea n the nozzle.
2, the intake pressure can be adjusted according to your needs(2.5-3.0bar),t o reduce the paint rebound, saving paintslender sprayinguniform atomization,spray large,fine particles,the effect is particularly good, spraying ef ficiency High speed
3, it’s suitable for use in the large of coatingcan be installed in the mechanical a arm or automatic painting equipment.
4, this automatic spray gun is widely used in industry because of easy operatio on, atomization uniform, spray large,fine particles, light weight it is widely used by industry, such as computer shell mobile phone shellcosmetic shell,furniture, hand tools,medicine,Textileglassplastic, rubber, printing,die-casting,building materials, hardware and other industries can be us sed.
5, with a variety of nozzle caliber for choice,and a variety of spray cover, so you u se more convenient.
nozzle and thimble 304 stainless steel, suitable for spraying water-based pain t.
Product parameter
All the data in the table are collected from CNISOO / CNSEIKO laboratory. The test fluid is tap water with PH = 7, the coating pressure is 1Bar, and the pipeline is directly connected. The atomized particle data is laser diffraction.
Form 1:
型号Model | ECO-RC-21 | ECO-RC-22 |
涂料喷嘴直径 Nozzle Diameter(mm) | 0.5/0.7/0.9/1.1/1.4/1.7 | 1.1/1.2/1.4/1.5/1.8/2.0/2.4 |
空气使用量 Air Consumption (l/min) | 200~360 | 200~450 |
涂料喷出量 Output (ml/min) | 0~300 | 0~550 |
打开喷幅 Pattern Width (mm) | 280@H=300mm | 280@H=300mm |
搭载雾化帽 Air Cap Model | 五轴机加工一次成型雾化帽 | 五轴机加工一次成型雾化帽 |
搭载供油系统 | 稳压过滤型 | 稳压过滤型 |
安装孔尺寸Mounting hole diameter (mm) | M8螺牙/M8 thread | M8螺牙/M8 thread |
◎It will vary with the paint volume,spray width,paint viscosity and pressure
Products Detail
CA-1000 is a type low-pressure and high atomization automatic spray gun. It is suitable for mass production and usually used with automatic spraying machine reciprocating spraying machine and spraying robot.High viscosity binder can also achieve high micronization, large
spray width and discharge volumereducing coating dripping of front nozzle. to achieve stable
spray. The use of central air and angle air independent control,can remotely change the spray width. When spray easy-precipitate paintfor examplemetal coatings ,our spray gun can effectively improve plug problemequipping with recyled paint and our specially developed point spray system.
Product Category:General model spray gun
Model:ECO-RC-21
Application
Automotive interior parts/exterior parts sprayino
Notebook parts /chassis spraying,water-based paint spraying
Plastic metalsurface spravingvarnish colorpaint3C
3C product line spraying, robot reciprocating machine installation.
Product parameter
1, intake adjustment and spray amplitude adjustment are set in the machine ed quipment, It can remote control operation,and independent control, reduce the troubled of operation,designed to return material hole is easy to clea n the nozzle.
2, the intake pressure can be adjusted according to your needs(2.5-3.0bar),t o reduce the paint rebound, saving paintslender sprayinguniform atomization,spray large,fine particles,the effect is particularly good, spraying ef ficiency High speed
3, it’s suitable for use in the large of coatingcan be installed in the mechanical a arm or automatic painting equipment.
4, this automatic spray gun is widely used in industry because of easy operatio on, atomization uniform, spray large,fine particles, light weight it is widely used by industry, such as computer shell mobile phone shellcosmetic shell,furniture, hand tools,medicine,Textileglassplastic, rubber, printing,die-casting,building materials, hardware and other industries can be us sed.
5, with a variety of nozzle caliber for choice,and a variety of spray cover, so you u se more convenient.
nozzle and thimble 304 stainless steel, suitable for spraying water-based pain t.
Product parameter
All the data in the table are collected from CNISOO / CNSEIKO laboratory. The test fluid is tap water with PH = 7, the coating pressure is 1Bar, and the pipeline is directly connected. The atomized particle data is laser diffraction.
Form 1:
型号Model | ECO-RC-21 | ECO-RC-22 |
涂料喷嘴直径 Nozzle Diameter(mm) | 0.5/0.7/0.9/1.1/1.4/1.7 | 1.1/1.2/1.4/1.5/1.8/2.0/2.4 |
空气使用量 Air Consumption (l/min) | 200~360 | 200~450 |
涂料喷出量 Output (ml/min) | 0~300 | 0~550 |
打开喷幅 Pattern Width (mm) | 280@H=300mm | 280@H=300mm |
搭载雾化帽 Air Cap Model | 五轴机加工一次成型雾化帽 | 五轴机加工一次成型雾化帽 |
搭载供油系统 | 稳压过滤型 | 稳压过滤型 |
安装孔尺寸Mounting hole diameter (mm) | M8螺牙/M8 thread | M8螺牙/M8 thread |
◎It will vary with the paint volume,spray width,paint viscosity and pressure
Products Detail
CA-1000 is a type low-pressure and high atomization automatic spray gun. It is suitable for mass production and usually used with automatic spraying machine reciprocating spraying machine and spraying robot.High viscosity binder can also achieve high micronization, large
spray width and discharge volumereducing coating dripping of front nozzle. to achieve stable
spray. The use of central air and angle air independent control,can remotely change the spray width. When spray easy-precipitate paintfor examplemetal coatings ,our spray gun can effectively improve plug problemequipping with recyled paint and our specially developed point spray system.